- Overview
- Product Description
- Specification
- Packing & Delivery
- Company Profile
- FAQ
Basic Info.
Model NO.
FZ002BF2
Sensitivity
Minimum100 Cfu/Test
Feature
Easy Operation
Customized Support
OEM
Transport Package
Carton
Specification
48tests/box
Trademark
BHK
Origin
Guangdong, China
Product Description
Introduction
This kit is only suitable for qualitative detection of fecal streptococci in water bodies. Other tests must be carried out in accordance with the national standard "GB8538-2016 National Food Safety Standard Drinking Natural Water Detection Method". Principle
Based on Real Time PCR technology, primers, fluorescent probes and other reagents required for the specific gene of fecal streptococci are used to add the sample to be tested for amplification reaction. During the amplification process, the fluorescent probe binds to the target gene fragment, which can be decomposed by Taq enzyme and produce a fluorescent signal. At this time, the fluorescent quantitative PCR instrument can recognize the fluorescent signal and draw the corresponding real-time amplification curve according to its strength changes, thereby determining whether fecal streptococci are detected.
How to use?
1. Sample pretreatment 1) Preparation of sample enrichment solution template DNA: a) Take 250 mL of the water sample to be tested and filter it, then place the filter membrane in 100 mL of azide glucose liquid culture medium for pre-enrichment culture, and pre-enrichment culture at 36 ±1 for 18~24 h; b) Take 1 mL of the above enrichment solution to a 1.5 mL sterile centrifuge tube, centrifuge at 6000 r/min for 5 min, and completely remove the supernatant; c) Add 30 μL of lysis solution to fully suspend the sediment at the bottom of the tube, tap the tube wall to eliminate bubbles, and heat at 99 for 10 min; d) Centrifuge at 12000 r/min for 15 min, the supernatant is the sample DNA to be tested, and leave it on ice. If it is not used for a long time, it should be centrifuged again. 2) Preparation of suspicious colony template DNA: Pick suspicious colonies, fully suspend them in a sterile centrifuge tube pre-added with 30 μL of lysis solution, and then follow the above steps c) and d). 2. Sample addition and reaction 1) Take n PCR reaction tubes as required (n=1 tube of negative control + number of samples to be tested + 1 tube of positive control), take out the premix from the kit, fully melt, vortex and briefly centrifuge, add 20 μL of premix to each tube and set aside. 2) Add 5 μL of negative control, sample DNA to be tested, and positive control to the above n reaction tubes, respectively, with a total reaction volume of 25 μL. Cover the tube cap tightly, centrifuge briefly, and immediately perform PCR amplification reaction. 3) The PCR reaction system is 25 μL, take the FAM detection channel, and collect the fluorescence signal at 60°C in reaction stage 2. The specific procedure is as follows:
1. Sample pretreatment 1) Preparation of sample enrichment solution template DNA: a) Take 250 mL of the water sample to be tested and filter it, then place the filter membrane in 100 mL of azide glucose liquid culture medium for pre-enrichment culture, and pre-enrichment culture at 36 ±1 for 18~24 h; b) Take 1 mL of the above enrichment solution to a 1.5 mL sterile centrifuge tube, centrifuge at 6000 r/min for 5 min, and completely remove the supernatant; c) Add 30 μL of lysis solution to fully suspend the sediment at the bottom of the tube, tap the tube wall to eliminate bubbles, and heat at 99 for 10 min; d) Centrifuge at 12000 r/min for 15 min, the supernatant is the sample DNA to be tested, and leave it on ice. If it is not used for a long time, it should be centrifuged again. 2) Preparation of suspicious colony template DNA: Pick suspicious colonies, fully suspend them in a sterile centrifuge tube pre-added with 30 μL of lysis solution, and then follow the above steps c) and d). 2. Sample addition and reaction 1) Take n PCR reaction tubes as required (n=1 tube of negative control + number of samples to be tested + 1 tube of positive control), take out the premix from the kit, fully melt, vortex and briefly centrifuge, add 20 μL of premix to each tube and set aside. 2) Add 5 μL of negative control, sample DNA to be tested, and positive control to the above n reaction tubes, respectively, with a total reaction volume of 25 μL. Cover the tube cap tightly, centrifuge briefly, and immediately perform PCR amplification reaction. 3) The PCR reaction system is 25 μL, take the FAM detection channel, and collect the fluorescence signal at 60°C in reaction stage 2. The specific procedure is as follows:
| Reaction stage | Temperature | Time | Signal collection | Number of cycles |
| 1 | 95°C | 30 sec | / | 1 |
| 2 | 95°C | 5 sec | / | } 40 |
| | V | 40 sec | | |
3. Results: In general, the test results can be directly read through the baseline and threshold automatically set by the software. If adjustments are required, they can be made according to the instrument's own conditions (such as noise, etc.) and the different fluorescent channels selected. 1) Quality control: The negative control does not show an obvious S-type amplification curve or the Ct value is greater than 35, and the positive control shows an S-type amplification curve and its Ct value is less than 30. If the positive and negative controls do not meet the above conditions at the same time, the test results are invalid and should be retested or contacted with product technical support. 2) Result interpretation: (interpretation based on the Ct value obtained by the reaction, see the table below for details:)
| Ct value | | Result interpretation | | | |||
| ≤35 | | Streptococcus faecalis positive. | | | |||
| 35~37 | | Retest is recommended. If the result Ct≥37, Streptococcus faecalis is negative, otherwise it is Streptococcus faecalis positive. | | | |||
| ≥37 | | Streptococcus faecalis negative. | | | |||
Our service
1.Offering Sample for Testing .
2.R & D team to provide technical support.
3.Provide packaging, labeling OEM customization.
2.R & D team to provide technical support.
3.Provide packaging, labeling OEM customization.
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Guangdong HuanKai Microbial Sci. & Tech. Co.,Ltd. is a national high-tech enterprise under the Guangdong Institute of Microbiology which is attached to Guangdong Academy of Sciences. Since established in 1993, HuanKai has adhered to the strategy of scientific and technological innovation and development, and has formed four product lines including microbiological testing reagents and consumables, digital laboratory instruments, physical and chemical rapid water detecting products, and high-efficiency environmentally friendly cleaning agents and disinfectant, both are with independent intellectual property rights. More than 2, 000 varieties of products are widely applied in mainland China, Hong Kong, Macao, Taiwan and Southeast Asia. Huankai has developed into an important R&D production base for domestic food and other industry.
1. Who are we?
HuanKai are based in Guangdong, China, start from 1993,there are total about 301-500 people in HKM. HuanKai has successfully established four major product lines: microbiological testing reagents and consumables, digital laboratory instruments, rapid water testing products for physical and chemical analysis, and eco-friendly cleaning and disinfection solutions. These lines boast over 2,000 different products, each protected by independent intellectual property rights.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Microbial Detection Product,Peptone&Tryptone,Deydrated Culture Media,Granular Media,Microbial Air Sampler and so on.
4. Why should you buy from us not from other suppliers?
1.With strong R&D capacity and good scientific research conditions,over 30 years of experience 2.One of the largest physicochemical reagent and culture media manufactuer in China follow international standard 3.Stable high quality main raw material from Europe & strictly quality control
5. What services can we provide?
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese